Filbur FC-2190 Replacement For Seahorse 75

Customers Who Bought This Item Also Bought
• Merv 13 FiltersFast 1" Allergy AC and Furnace Filters 6-Pack $74.90
  
• True HEPA Allergy Relief Desktop & Small Room Air Purifier $99.99
  
• Comfortable, Reusable Particulate Respirator Facemask by RZ Mask - Meets N95 & N99 Standards $19.95
  

The Filbur FC-2190 is a compatible replacement for the following pool and spa filters:

• Seahorse/Pentair 300, 75 sq. ft.
• Seahorse 300 stainless/fiberglass tank
• Pentair Pool Products/Purex 1722840
• Unicel C-7491
• Pleatco PFAB75-4
• Aladdin 17524

The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow.

All Filbur Pool & Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool & Spa filters.

Filbur FC-2190 Specifications:

• Part Number: FC-2190
• 4 oz.
• Length: 18 7/16"
• Diameter: 7"
• Top: Open 2 5/8"
• Bottom: Open 2 5/8"
• Square Feet: 75

The Filbur FC-2190 is compatible with hot tubs, pools and filters made by Pentair Pool Products, Purex and others. Original Manufacturer part number 1722840.

**Please note: The Seahorse 300 requires four of these filters***

Cleaning your Filbur Pool and Spa Filters

• It is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed.
• In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water.
• Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter.
• DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.

Customer Reviews:

There are no reviews for this product yet!