Filbur FC-2370, Rainbow Dynamic 25 Pool Filter

FC-2370

Get 5% Off When You Check Out With Auto Delivery

You Choose the amount of months, we take care of the rest.

Get Details

Product Information

Customers Who Bought This Item Also Bought

HM PH-200 Waterproof pH Meter
$79.95
HM Digital pH Buffer Solution Variety Pack
$8.95
ITS eXact Micro 7+ Standard Photometer Kit
$260.00

The Filbur FC-2370 is a compatible replacement for the following pool and spa filters:

Rainbow/Pentair Dynamic 25 4oz.
Pentair Pool Products/Rainbow Plastics 17-2325
Unicel C-4625
Pleatco PRB25-IN-4

The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. Filbur Pool and Spa Filters are completely washable and reusable.

The Filbur FC2370 product specifications:

3 oz.
Length: 13 5/16"
Diameter: 4 15/16"
Top: 2 1/8"
Bottom: 2 1/8"
25 square feet

The Filbur FC-2370 works with hot-tubs and filters made by Aires, Alps Spas, Aries Spas, Blue Pacific, Continental Leisure, Conway Spas, Down East, Elite Spas, Esther Williams, FPI, HaughS, Heldor Spas, Hydro Pool Industries, J.E.M. Spas, Niagara Whirlpool, Orion Spas, Pdc Spas, Pentair Pool Products, Rainbow Plastics, Resort Spas, Sequoia Spas, Serenity Spas, Sun Spas, Thermo Spas, Warm Spring Spas, Waters Edge Spas. Also known as part number 17-2325.

Cleaning your Filbur Pool and Spa Filters

It is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed.
In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water.
Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer�s directions for installing the filter.
DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.