The Pentek C1 is the correct replacement carbon-impregnated cellulose water filter for the Ametek 155002. The Pentek C1 cartridge can features tremendous high-dirt holding capacity and chlorine reduction. The C1 is a dual-purpose containment reduction cartridge that captures extra fine dirt, rust, sand, and scale particles, but that is just one aspect of this filter. The filter's polyester reinforced backing and external netting ensures the filter has additional strength for fewer change outs and greater value.

The Pentek C1 replacement water filter cartridge performs optimal in residential applications, and as polishing filters when used in process or closed-loop streams.

Pentek C1 Replacement Specifications:

• Part Number: C1
• Replaces Part Number: Ametek 155002
• UPC Number: 051678002438
• Dimensions: 9-3/4"x2-1/2" (2-5/8" with end-caps)
• Filter Media: PAC Impregnated Cellulose
• Filter Life: 2,500 gallons; 3 months
• Micron Rating: 5
• Flow rate: 5 gpm
• Temp Range: 40 - 125 °F
• NSF Tested and Certified for Standard: 42
• End Caps: Vinyl Plastisol
• Netting: Polyethylene
• Core: Polypropylene
• Reinforcement Backing: Cellulose Polyester
• Economically priced
• High dirt-holding capacity
• Recommended for chlorinated water supplies
• Warning: For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Not recommended with well water.
• Note: Some harmless bacteria will attack cellulose media cartridges. If your cartridge seems to disintegrate, or has a musty or moldy odor, switch to a synthetic media cartridge or consult the manufacturer.

The Pentek C1 Replacement is NSF Tested and Certified to Reduce:

• Chlorine taste and odor
• Sediment

The Pentek C1 Replacement is Compatible With the Following Filters:

Ametek

• CTR-210

American Plumber

• 155002-52
• W5CIP

Culligan

• HF-150, HF-160, HF-360
• US-550, US-560
• SY-2000, SY-5167, SY-51971

GE

• FXWTC
• GXWH04F, GXWH08C

The Pentek C1 Replacement Fits Standard Size #10 Slim Line Filter Housings From Ametek, Cuno, Harmsco, Kleen, and Other Models That Share Dimensions.

If you don't see your model number check with the manufacturer to verify compatibility.

View the Full C1 Product Specification.

Compatible Models:

The Pentek C1 is correct replacement for the following model numbers:

California Residents: Prop 65 Warning

The GE FXWTC SmartWater household water filter features a nominal 5 micron rating for the reduction of chlorine, sediment, silt and rust from drinking water and can used in place of the FXUSC, FXWSC and FXWPC. When paired with a whole house water filtration system, the FXWTC acts as a barrier between the water flowing into your home and the equipment that uses the water. An added benefit of these systems is that other filtration products you use in your home can function better because there are fewer of these particles clogging the filter media. GE recommends replacing this filter every 3 months for optimal performance and efficiency.

GE FXWTC Filter Specifications:

• Part Number: FXWTC, AP3427474
• Dimensions: 9-3/4" x 2-1/2" (2-5/8" with end-caps)
• Filter Media: PAC Impregnated Cellulose
• Capacity: 2,500 gallons 3 months
• Micron Rating: 5
• Flow Rate: 5 gpm
• Temp Range: 40 - 125 F
• NSF Tested and Certified for Standard: 42
• End Caps: Vinyl Plastisol
• Netting: Polyethylene
• Core: Polypropylene
• Reinforcement Backing: Cellulose Polyester
• High dirt-holding capacity
• Recommended for chlorinated water supplies
• Warning: For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Not recommended with well water.
• Note: Some harmless bacteria will attack cellulose media cartridges. If your cartridge seems to disintegrate, or has a musty or moldy odor, switch to a synthetic media cartridge or consult the manufacturer.

The GE FXWTC is NSF tested and certified to reduce:

• Chlorine Taste and Odor
• Sediment

The GE FXWTC replaces the following filters:

Ametek

• CTR-210

American Plumber

• 155002-52
• W5CIP

Culligan

• HF-150, HF-160, HF-360
• US-550, US-560
• SY-2000, SY-5167, SY-51971

GE

• FXWTC
• GE GXWH01C
• GE GXWH04F
• GE GXWH08C
• GE GXWH20F
• WHCF-WHWC
• GE GXWH20S

Compatible Models:

The GE FXWTC is correct replacement for the following model numbers:

Customer Reviews

Total Reviews: 2 | Average Rating: 5 / 5.0

Anonymous2021-04-15

Very nice to have

Collected by Trustpilot.com

Anonymous2020-12-28

As advertised.

Collected by Trustpilot.com