Culligan HD-950 - 10" x 4.5" Water Filter Housing
You Save: 29%
The Culligan Water Filter Housing HD-950 accommodates standard size large 10" water filters (roughly 9 3/4" x 4 1/2") made by Culligan, Pentek, Ametek, American Plumber, Omnifilter and more (filter cartridge not included). This Culligan filter housing is generally used as a whole house water filter, and is often used before water heaters or water softeners to filter the water going into these appliances. Not only will your filtered water be cleaner and taste better, but you will extend the life of your equipment. Depending on the water filter cartridge you install in it, this filter housing can reduce sediment, chlorine, and many more contaminants.
Culligan filter housings accomodate larger 10" water filters with flow rates suitable for whole house water filter applications. The Culligan HD-950 Filter Housing installs easily and includes a Culligan SW-3 Filter Housing Wrench.
This Culligan filter housing is used on 1" water lines (cold only) at the point of entry. Sitting atop the filter housing cap is a red pressure relief button, which vents excess pressure inside the housing to make installing Culligan replacement filter cartridges a breeze.
Culligan HD950 Filter Housing Specifications:
- Pressure Relief Valve
- Temp. Range: 40 - 100 F
- Press. Range: 30 - 125 PSI
- Culligan SW-3 Filter Wrench Included
- The SW-3/ Metal SW-3 is the correct wrench for this housing
- 1" Female Pipe Threads (1" compression fittings not included)
This Culligan HD-950 is tested and certified by NSF International to NSF / ANSI Standard 42 for material and structural integrity requirements. Culligan has been a trusted water filtration brand since 1936. Get Culligan water treatment without calling the Culligan man!
Need to know how to install a whole house water filter housing or how to replace Culligan filters? Check out this Culligan product manual for more information.
Culligan HD-950 - 10" x 4.5" Water Filter Housing Product Reviews :Write a review
- Not reviewed yet