Filbur FC-2395 Replacement For Custom Molded Products 25390

Customers Who Bought This Item Also Bought

The Filbur FC-2395 is the replacement filter for the Custom Molded Products CMP 25390 R.

The Filbur FC-2395 Pool Cartridge has a diameter of 4 15/16 inches, and a length of 20 1/8 inches. This spa filter has both an open top and bottom, and each has a diameter of 2 1/8 inches. This pool filter replacement will keep the water in your pool or spa clean and clear.

The Filbur FC-2395 Product Specifications:

• Part Number: FC-2395
• Replaces Part Number: CMP 25390 R
• 3 oz.
• Length: 20 1/8"
• Diameter: 4 15/16"
• Top: Open 2 1/8"
• Bottom: Open 2 1/8"
• Square Feet: 75

The Filbur FC-2395 is compatible with hot tubs, pools and filters made by Dakota Spas, Emerald Spas, Custom Molded Products, Hydro Pool Industries, Pentair Pool Products, Rainbow Plastics, Serenity Spas and others. Original Manufacturer part number 17-2632.

Cleaning your Filbur Pool and Spa Filters

It is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed.

In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water.

Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter.

DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.

Compatible Parts:

The Filbur FC-2395 Replacement For Custom Molded Products 25390 is the correct replacement for the following part numbers: