Filbur FC-1401 Replacement For Jacuzzi Sherlock 120
The Filbur FC-1401 is a compatible replacement for the following pool and spa filters:
- Sherlock 120
- Jacuzzi Brothers 42-3675-08-R
- Unicel C-9481
- Pleatco PJ120-4/-M4
- Aladdin 22006
Filbur FC-1401 Spa Filter Specifications:
- Part Number: FC-1401
- Replaces Part Number: Jacuzzi Sherlock 120
- 4 oz.
- Length: 20 1/16"
- Diameter: 10"
- Top: Handle
- Bottom: Open 6"
- Square Feet: 120
- Media: 4 oz/yard
Cleaning your Spa and Jacuzzi Filters:
- Clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the spa filter was newly installed.
- To clean the spa filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the water filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water.
- Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the spa filter.
- DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.
The Filbur FC-1401 Replacement For Jacuzzi Sherlock 120 is the correct replacement for the following part numbers:
Please provide your e-mail address below to receive a notification when this product becomes available:X
Thanks! We'll send you a notification when this product is available!