Hydronix 30" Sediment Filter Cartridge - 75 Micron

This Hydronix 30" Sediment Filter Cartridge is the same economical replacement for the 75 micron Liquatec SDF-25-3025 30" Sediment Filter. The Hydronix Sediment Water Filter is resistant to chemicals and reduces waterborne contaminants like sediment, rust, silt and sand. Also known as part number SDC-25-3075, this Hydronix filter cartridge is widely used as pre-filtration for reverse osmosis systems and post-filtration for granular activated carbon (GAC) filters. Constructed with 4 separate layers of micron filtration and the outside-in flow allows the outer layer of this sediment depth cartridge to trap larger sized particles, resulting in a lower pressure drop compared to conventional filters.

The graded density provides a higher dirt holding capacity over standard spun polypropylene and string wound cartridges. This filter is ideal for a wide range of residential, industrial, commercial and food service applications. The operating temperature range of this 100% polypropylene water filter cartridge is 40 degrees to 145 degrees Fahrenheit. The Hydronix SDC-25-3075 cartridge filter is binder free, surfactant free and adhesive free.

The Hydronix 30" Sediment Filter fits standard water filter housings requiring a 2.5x30 inch filter media. Do not use this sediment depth cartridge with microbiologically unsafe water without adequate disinfection before or after the system. Change your polypropylene water filter every 6 months depending on water quality and usage. Be sure to double check the size of your filter before purchasing. See our full line of 30' sediment water filter cartridges: 30 inch Sediment Filters

Specifications:

• Brand: Hydronix
• Part Number: SDC-25-3075
• Pack Size: 20
• Dimensions: 2 1/2" x 30"
• Filter Life: 6 months
• Micron Rating: 75
• 100% polypropylene media
• Flow rate: 0.3 psi@ 15 gpm
• Certified to NSF standard 42
• Liquatec SDF-25-3025 Filter Replacement
• Surfactant free, binder free, adhesive free