Watts WPC1-20 Replacement for Hydronix SPC-25-2001

The Watts WPC1-20 Replacement for Hydronix SPC-25-2001 Pleated Sediment Filter is a 20"L x 2 3/4"D pleated water filter replacement cartridge used primarily in whole house water filter systems to reduce sediment as well as many contaminants such as dirt, turbidity, limescale, rust, sand, silt, and other common particulates and impurities. This Watts WPC1-20 pleated sediment water filter cartridge has a color coded tan endcap to denote that it is a 1 micron pleated filter cartridge.

The Watts WPC1-20 pleated water filter uses advanced synthetic pleated polypropylene filtration technology for a larger filter surface area, longer cartridge life, higher flow rates, greater dirt holding capacity, lower pressure drop, and more efficient sediment filtration when compared to other sediment filters which use different types of filter media such as resin, melt blown, spun, string wound, etc. The 100% synthetic cellulose-free pleated polypropylene media does not contain binders or additives.

This Watts pleated filter is a compatible replacement sediment filter cartridge for similar 20" sediment filter brands of all types including Pentek filters, Ametek filters, Culligan filters, US Filter filters, Ace filters, American Plumber filters, Bruner filters, Plymouth filters, Pentair filters, and other name brands. It will fit all whole house filter housings which use a 20" x 2.75" water filter replacement cartridge.

More technical information about Watts pleated water filters can be found here.

Specifications:

• Brand: Watts
• Part Number: WPC1-20
• Replaces Part Number: SPC-25-2001
• Pack Size: 1
• Micron Rating: 1 Micron
• Filter Life: Approx. 6 months
• Dimensions: 20" L x 2 3/4" OD
• Temperature Range: 40 - 140 F
• Max. Operating Pressure: 40 PSID
• Recommended Change Out: 25 PSID
• Filter Media: Cellulose-free synthetic pleated polypropylene
• Max. Flow Rate: About 8 gallons per minute (8 GPM), though it varies according to the specific filter system used