Replacement for Model Hydrotech 1020 Series
Hydrotech Flow Control Retrofit Kit 33138 - 50 GPD
You Save: 11%
The Hydrotech 33138 replaces the Hydrotech 40600006 Flow Control and can be used in the following models:
- 101 Series
- 102 Series
- 103 Series
- 1010 Series
- 1020 Series
- 1030 Series
The Hydrotech Flow Control Retrofit Kit 33138 - 50 GPD replaces the Hydrotech 40600007 45 GPM flow control and updates the old drain line flow control of these systems with one similar to the new Hydrotech 1240 RO Systems. This flow control kit should be matched with RO membranes with a 50 gallon per day capacity, such as the Hydrotech 33001033 TFC 50 GPD Membrane. If you have any of the discontinued RO systems and are using the 40600006 flow control, you will need to update to the 33138 retrofit kit and move from a 35 gpd membrane to a 50 gpd membrane.
Once you've installed the Hydrotech Retrofit Kit, you will later only need to purchase the 40600041 Water Flow Restrictor, which should be changed each time you change your reverse osmosis membrane. The flow restrictor creates pressure through the RO membrane so as to keep a proper balance between the rejected water and the filtered water.
The Retrofit Kit includes a flow control tube and a flow control retrofit plug.
Hydrotech Flow Control Retrofit Kit 33138 - 50 GPD Product Reviews :Write a review
- Not reviewed yet
|33138 is used in the following Models|
Hydrotech 101 Series
Hydrotech 103 Series
Hydrotech 1030 Series
Hydrotech 1010 Series
Hydrotech 102 Series
Hydrotech 1020 Series