Watts WPC20-975 Compatible Sediment Filter

The Watts WPC20-975 filter cartridge fits the following water filter housings:

• Pentek 150067
• Standard 10 inch housings

The Watts WPC20-975 Compatible Sediment Filter is a 10 inch water filter used primarily in whole house water filter systems. This pleated water filter reduces sediment, dirt, turbidity, lime scale, rust, sand, silt, and other common particulates and impurities. This pleated sediment filter has a 20 micron rating for improving water quality and taste.

This Watts filter uses advanced synthetic pleated polyester filtration technology for a larger filter surface area, longer cartridge life, higher flow rates, greater dirt holding capacity, lower pressure drop, and more efficient sediment filtration.

Watts 10" Pleated Sediment Filter Specifications (WPC20-975):

• 20 micron rating
• Filter Life: Approx. 6 months
• Dimensions: 9 3/4 inches L x 2 3/4 inches OD
• Max. Operating Pressure: 40 PSID
• Filter Media: Cellulose-free synthetic pleated polyester
• Max. Flow Rate: About 8 gallons per minute (8 GPM), though it varies according to the specific filter system used

This Watts pleated filter is a compatible replacement sediment filter cartridge for similar 10 inch sediment filter brands of all types including Pentek filters, Ametek filters, Culligan filters, US Filter filters, Ace filters, American Plumber filters, Bruner filters, Plymouth filters, Pentair filters, and other name brands.

More technical information about Watts pleated water filters can be found here.

The Filters Fast® FF10PS-20 Replacement for Pentek S1 features a 20-micron filtration design to reduce sediments in your tap water. The high dirt holding capacity allows for a longer service life with fewer filter changes to save you money. These filters are ideal in whole house applications where a system is installed at the water's point-of-entry.

Specifications:

• Brand: Filters Fast®
• Part Number: FF10PS-20
• Replaces Part Number: S1
• Pack Size: 1
• Filter Media: Pleated polyester
• Dimensions: 9 7/8" x 2 1/2"
• Micron Rating: 20
• Flow Rate: 1 psi @ 10 gpm
• Maximum Operating Temperature: 125 ° F
• Reduces waterborne contaminants
• Resistant to chemicals and bacteria

Customer Reviews

Total Reviews: 2 | Average Rating: 5 / 5.0

Ron Lowenstein2023-05-01

Was fairly price and delivery was great

Collected by Trustpilot.com

Justine F.2023-02-03

So far, this filter has fit the bill. It literally fits the canister perfectly and although I'm just on the first filter, it seems to be doing a good job with my very hard water.

Collected by Trustpilot.com