Free Shipping on orders over $99 FREE 365-DAY RETURNS
Filters Fast - Filter. Purify. Protect.

Pentek NCP-20BB, 155382-43 Pleated Carbon Impregnated Non-Cellulose Water Filter Cartridge

NCP-20BB

$66.20
Retail: $82.05 /ea
You Save: 19%
Buy 1 - 7 for $66.20 ea.
Buy 8+ for $64.20 ea.
As low as
$66.20
Retail: $82.05
You Save: 19%
Ready to Ship!
Shipping Icon
Free Shipping over $99
FREE 365 Day Returns
Auto Ship Icon Save up to 10% and get FREE shipping on every order. Filtration essentials delivered on your schedule. Learn More
Frequently Bought With This Item

The Pentek NCP-20BB, 155382-43 Pleated Carbon Impregnated Non-Cellulose Water Filter Cartridge filters sediment as well as chlorine taste & odor. The NCP-20BB is constructed with carbon impregnated media not cellulose therefore providing resistance to bacterial attack which makes this filter eligible for use with non-chlorinated well water. The pleating of the Pentek NCP20-BB provides additional surface area to increase the dirt holding capacity and life of this filter.

Specifications:

  • Brand: Pentek
  • Part Number(s): NCP-20BB, 155382-43
  • Pack Size: 1
  • Filter Life: 6 - 12 Months
  • Micron Rating: 10
  • Dimensions: 20 inches x 4 1/2 inches
  • Flow Rate: 10 GPM @ 1 psi
  • Temp Range: 40 - 125 F
  • Chlorine Reduction Capacity: 1000 Gallons @ 4 GPM

How do you install the Pentek NCP-20BB, 155382-43?

  1. Turn off water supply. Press red pressure-relief button (if present).
  2. Unscrew housing. Remove large o-ring, wipe clean and set aside.
  3. Discard used Pentek NCP-20BB, 155382-43 cartridge. Wash housing with dish soap and warm water using a nonabrasive sponge or cloth. Rinse thoroughly.
  4. Fill 1/3 with water. Add about 1 tablespoon of bleach and scrub to disinfect. Rinse thoroughly.
  5. Lubricate o-ring with clean silicone grease. Change o-ring if any damage cuts or degradation are present. Insert o-ring in groove.
    • NOTE: This step is important to ensure a proper housing seal. Make certain the o-ring is seated level in the groove.
  6. Insert new Pentek NCP-20BB, 155382-43 filter cartridge.
  7. Screw housing onto the cap and hand-tighten. Do not over tighten. Make sure cap standpipe slips into cartridge.
  8. Turn on water supply. Press pressure-relief button (if present). Check for leaks before leaving installation.

How often should you replace the Pentek NCP-20BB, 155382-43?

  • Changing your Pentek NCP-20BB, 155382-43 is a very quick and easy process that should be done once every six to twelve months.

What contaminants does the Pentek NCP-20BB, 155382-43 reduce?

  • The Pentek NCP-20BB, 155382-43 reduces the following contaminants:

    • Dirt
    • Sand
    • Sediment
    • Chlorine
    • Taste & Odor

    Compatible Parts:

    The Pentek NCP-20BB, 155382-43 Pleated Carbon Impregnated Non-Cellulose Water Filter Cartridge is the correct replacement for the following part numbers:

    Part Number
    • 155382-43
    • No results for {X}
    prop 65 warning California Residents: Prop 65 Warning

    Ask Our Product Experts



    Product Availability

    Please provide your e-mail address below to receive a notification when this product becomes available:

    X
    X

    Thanks! We'll send you a notification when this product is available!

    Get Help and Support Need Help?
    X