3M Filtrete AP110 Whole House Water Filter Cartridge - 2-Pack
Hydronix SGC-25-1005 Replacement for Filters Fast® FF10S-5-AP Water Filter Cartridge - 5 Micron
Compare & Save
The 3M Filtrete AP110 Whole House Water Filter Cartridge - 2-Pack features a grooved design and an exclusive graded density design that allows for up to 30% longer life than most filters in its same class. This 5 micron water filter can withstand extreme pressure drops and stress such as water hammer.
Specifications:
- Brand: 3M Aqua-Pure
- Part Number: AP110
- 3M ID Number: 7000029441
- Pack Size: 2
- Filter Life: 6 Months
- Micron Rating: 5
- Flow rate: 8 gpm
- Dimensions: 9 3/4" x 2 1/2"
- Operating Temperature: 100 Degrees
How do you install the 3M Filtrete AP110?
- A11T: Shut off inlet and outlet valves, depress pressure relief button on top of filter head to relieve pressure in filter. AP101T, AP141T and AP102T: Turn valve handle to “OFF” position. The inlet and outlet lines are now closed off from the filter chamber and the pressure has been released at the built-in vent port.
- Unscrew housing to the left from the filter head and remove cartridge, emptying water from housing.
- Clean and inspect all components. Lubricate o-ring with a silicone based lubricant. Replace o-ring seal if there is visible damage.
- Install new 3M Filtrete AP110 cartridge into housing, over centering post if you have a two-high unit.
- Place lubricated o-ring on the housing. Screw housing to the right firmly onto head until a definite stop is felt and cartridge is sealed. Hand tight is sufficient. However, be sure not to overtighten or force housing.
- A11T: Turn on inlet valve and depress pressure relief button until air is purged from filter. Release button and turn on outlet valve. AP101T, AP141T and AP102T: Turn valve hand to the “ON” Position. Wait until filter is filled with water and check for leaks. Open and close the valve once to released trapped air. Allow a slight pause in the “OFF” position. Replace cartridge when there is a decided drop in water flow at the faucet or tap.
How often should you replace the 3M Filtrete AP110?
- Changing your 3M Filtrete AP110 is a very quick and easy process that should be done once every six months.
What contaminants does the 3M Filtrete AP110 reduce?
-
The 3M Filtrete AP110 reduces the following contaminants:
- Rust
- Sediment
Compatible Parts:
The 3M Aqua-Pure AP110 2 Pack is the correct replacement for the following part numbers:
- 5588618
- 7000029441
- 3M Aqua-Pure AP2005
- WHIRLPOOL 56204-06
- WHIRLPOOL 5620406
- WHIRLPOOL WHCF-GD05
- No results for {X}
Compatible Models:
The 3M Aqua-Pure AP110 2 Pack is correct replacement for the following model numbers:
- 3M Aqua Pure AQUA-PURE AP101 Whole House Filters
- 3M Aqua Pure AQUA-PURE AP101T Whole House Filters
- 3M Aqua Pure AQUA-PURE AP102 Whole House Filters
- 3M Aqua Pure AQUA-PURE AP11 Whole House Filters
- 3M Aqua-Pure AP101S System
- 3M Aqua-Pure AP101T System
- 3M Aqua-Pure AP102S System
- 3M Aqua-Pure AP102T System
- 3M Aqua-Pure AP11S System
- 3M Aqua-Pure AP12S System
- 3M Aqua-Pure AP12T System
- 3M Aqua-Pure AP1610 System
- 3M Aqua-Pure AP2610 System
- 3M Aqua-Pure FHO-34-S-S System
- 3M Aqua-Pure FHO-34-SS-S System
- 3M Aqua-Pure FHT-34-S System
- 3M Aqua-Pure FHT-34SS-S System
- 3M Aqua-Pure P11T System
- 3M Aqua-Pure SS12 EPE-316L Whole House System
- 3M Aqua-Pure SS4 EPE-316L Whole House System
- 3M Aqua-Pure SS8 EPE-316L Whole House System
- 3M Aqua-Pure SST1 System
- 3M Aqua-Pure SST2 System
- 3M Aqua-Pure USO-14-S System
- 3M Aqua-Pure USOM-38-S System
- 3M Aqua-Pure UST-38 System
- No results for {X}
Ask Our Product Experts
Product Availability
Please provide your e-mail address below to receive a notification when this product becomes available:
XThanks! We'll send you a notification when this product is available!















3M Aqua-Pure AP117 Replacement for Filters Fast® FF10C-5-AP - 2-Pack