Omnifilter RO2050 Compatible For OmniFilter RO2000 Undersink RO System
The Omnifilter RO2000 has been replaced by the Omnifilter RO2050 Undersink RO Water Filter System.
The Omnifilter RO2050 Undersink RO Water Filter System filters water through four stages to ensure your water is free of the pathogens, dissolved solids and organics, pesticides, VOCs and nitrates (90-95%) that lurk in your home's tap water. The RO2050 also effectively reduces rust, sediment, and the taste and odor of Chlorine in your water.
The RO2050 was tested and certified by NSF International against NSF / ANSI Standard 58 for the reduction of Barium, Cadmium, Copper, Cyst, Hexavalent Chromium, Lead, Radium 226/228, Selenium, Total Dissolved Solids and Trivalent Chromium.
The Omnifilter RO2050 reverse osmosis system includes:
- Air gap faucet (Chrome)
- ROR2000 contains (1) 5 Micron polyspun cartridge and (1) 0.5 Micron carbon block cartridge (change every 3 months)
- 1 TFC membrane (OM1) (change 1 - 2 years)
- 1 inline carbon post filter (R200)
- 3 gallon pre-charged pressure tank
- Installation hardware and wrench
You should change the filters in the RO2050 every six months. The membrane should be changed one or two years, depending on your water quality. This product was known previously as model number RO2000-R-03 and is now known by model number RO2000-S-05.
I've had mine for about 4 years and the water quality has been great. Unfortunately, the plumber 'rented' it to me for @22/month that was supposed to service the unit and change the filters once a year. The last two years, they did not use the correct filters and I stopped paying them when they refused to properly replace the filters. I'd advise you to order from this site and have your trusted plumber install it. Get the filters while you are at it. The unit is great!Collected by FiltersFast.com
Please provide your e-mail address below to receive a notification when this product becomes available:X
Thanks! We'll send you a notification when this product is available!