Doulton Fluoride CN-A2 Water Filter Candle
The Fluoride Water Filter Candle reduces fluoride in drinking water as small as 0.5 ppm. This water filter candle is also known as part number CN-A2. This water filter candle uses activated alumina that reduces fluoride in drinking water. This process helps the water filter candle to reduce fluoride levels from 10ppm F+ to below 0.2 ppm F+. The normal capacity of this fluoride filter candle is above 8,000ppm F+.
The CN-A2 Fluoride Water filter Candle contain fittings located inside the bore of this element that reduces unpleasant taste, odor, chlorine, herbicides, pesticides, heavy metals and industrial solvents. This filter candle reduces arsenic from 0.12 ppm to less than 0.02 in the water supply.
The CN-A2 Fluoride Water Filter Specifications:
- CN-A2 dimensions: 2" x 10"
- CN-A2 materials are FDA approved
- CN-A2 media: 400 grams of prepared activated alumina
- CN-A2 pre-filter: 100 Micron spun-bonded polypropylene
- CN-A2 post filter: 50 Micron spun-bonded polypropylene
The CN-A2 Fluoride Filter Candle is available in a 2" diameter with a threaded end or in a 9 3/4" cartridge for standard 10" and 20" housings. The 10" fluoride reduction element should be changed every 400 gallons or 6 months for optimal results. The 9 3/4" housing cartridge should be replaced every 600 gallons or 9 months for optimum performance.
The performance of this Fluoride Water Filter Candle will be broken down by flow rates in excess of 0.25 gpm, high bicarbonate or high pH water supply. When the water supply tests above 100 ppm of bicarbonate, fluoride reduction is less than 50%. If the water supply of this CN-A2 water filter candle is above 200 ppm, efficiency is reduced less than 75%.
Please provide your e-mail address below to receive a notification when this product becomes available:X
Thanks! We'll send you a notification when this product is available!