EverPure H-1200 Drinking Water System - EV928200, EV9282-00

When water quality matters, rely on the Everpure EV928200 H-1200 System. This system replaces basic or underperforming filtration systems to give your home high-performance, multi-stage water purification. Its dual-cartridge design uses advanced Micro-Pure™ filtration media to reduce a wide range of contaminants, including chlorine taste and odor, lead, VOCs, microplastics, cysts, and Total PFAS, while still retaining beneficial minerals that contribute to better taste. With a fine 0.5-micron rating and a controlled flow rate, it delivers consistent, reliable filtration without sacrificing water pressure. Over time, lower-quality systems can allow unwanted contaminants, off-tastes, and odors to persist, affecting both water quality and confidence in what you’re drinking. Designed for long-lasting performance with a capacity of up to 1,000 gallons or one year, this system provides a dependable solution for maintaining cleaner, better-tasting water directly from your tap. Upgrade your water quality with consistent, high-level filtration using the Everpure EV928200.

Specifications:

• Part Number: EV928200
• Capacity: 1000 gallons
• Flow Rate: 0.5 gpm
• Micron Rating: 0.5
• Dimensions: 15" W X 22" H X 5" D
• NSF Ratings: 42, 53, 401
• Maximum Temperature: 35-100° F
• Maximum Pressure: 10-125 psi
• Includes 1 Twin Filter Head
• Includes: 2 H-1200 Filter Cartridges

  The EverPure H-1200 Drinking Water System - EV928200 reduces the following contaminants and provides extra sediment-holding capacity:

• Lead
• Cysts such as Giardia lamblia, Entamoeba histolytica and Cryptosporidium parvum
• Bacteriostatic control.
• Volatile Organic Chemicals (VOCs), including THMs
• Chlorine taste and odor
• Dirt and cloudiness
• Mold and algae
• Particulates (oxidized iron, manganese and sulfides)

Resources:

• EverPure EV928200 Specification Sheet

California Residents: Prop 65 Warning

Customer Reviews:

Total Reviews: 1 | Average Rating: 4 / 5.0

spencer2022-03-23

Solid, professional looking and feeling unit... Install is pretty easy, but like others have said-- you really need about 25" of vertical space to accommodate filter install and removal. You MUST use a good amount of plumbers tape on the threaded fittings to the filter head or it will leak. Also, expect to spill a bit of water at filter change, so plan for that. No issues with flow rate, seems pretty fast, but we're only a month in. Water tastes pretty good, gets better actually after about 1 week of use, but still not as good as our zero water pitcher... But we were tired of replacing the filter on that every two weeks. For the taste I think the filter is a bit $$$... Probably would go with the 300 if I did it again, a friend has that one and the water tastes just as good for half the price.

Collected by Trustpilot.com