Pentek CB1-10 10" Carbon Block Filter - 1 Micron
You Save: 32%
Filters Fast® FF10CB-1 Replacement for Pentek CB1-10, 1 Micron Carbon Block
You Save: 19%
The Pentek CB1-10 Carbon Block Filter Cartridge is a 10" water filter replacement for use in various under sink filter systems, counter top filter systems, and more. The Pentek CB1-10 carbon block filter captures numerous contaminants including chlorine, sediment, dirt, rust, limescale, silt, sand, as well as other particulates to improve the taste, odor, clarity, and purity of water.
Pentek CB1-10 Carbon Block Filter Specifications:
- Temp. Range: 40 - 180 F
- Micron Rating: 1 micron
- Dimensions: 9 3/4" L x 2 7/8" W
- Filter Media: Extruded carbon block
- Flow Rate: About 1 gallon per minute (1 GPM), though the flow rate will vary slightly according to the filter system used
- Filter Life: Approx. 3 months or 1,500 gallons - filter should be replaced when a decrease in water pressure is noticed
The Pentek CB1-10 will fit all 10" x 2.5" water filter housings. In many cases, the use of a sediment pre filter prior to the use of this filter will extend its life. The CB1-10 filter is also known by Pentek part number 255382-43 / 25538243.
Please provide your e-mail address below to receive a notification when this product becomes available:X
Thanks! We'll send you a notification when this product is available!