Watts ETC10SEDCARB Zero Waste Reverse Osmosis Pre-Filter 5M
This Watts Zero Waste Reverse Osmosis Pre-Filter is a 5 micron FX-VOC carbon block prefilter for the reduction of sediment and chlorine in Watts E-Treat RO Systems. This RO filter is manufactured by Filtrex but is compatible with the Watts E-Treat Zero Waste Reverse Osmosis System (ETZWRO3-50PT).
This Watts compatible carbon block prefilter for the Watts E-Treat Zero Waste RO System is made from high performance coconut shell activated carbon. It features a low pressure drop, high dirt holding capacity, and advanced contaminant reduction.
Watts Zero Waste Reverse Osmosis Pre-Filter Specifications:
- Micron Rating: 5 microns
- Temperature Range: 40 - 100 F
- Dimensions: 9 /34" length x 2 3/4" width
- Flow Rate: 1GPM @ 2.6 PSI (may vary depending on system)
This Filtrex FX-VOC10 pre filter for Watts E-Treat Zero Waste RO Systems is also known by part number 101020.
This filter has been tested and certified by NSH International against NSF / ANSI Standard 42.
The Watts ETC10SEDCARB Zero Waste Reverse Osmosis Pre-Filter 5M is correct replacement for the following model numbers:
Please provide your e-mail address below to receive a notification when this product becomes available:X
Thanks! We'll send you a notification when this product is available!