Pentek C1 Replacement For Whirlpool WHCF-WHWC
The Pentek C1 is the correct replacement carbon-impregnated cellulose water filter for the Whirlpool WHCF-WHWC. The Pentek C1 cartridge can features tremendous high-dirt holding capacity and chlorine reduction. The C1 is a dual-purpose containment reduction cartridge that captures extra fine dirt, rust, sand, and scale particles, but that is just one aspect of this filter. The filter's polyester reinforced backing and external netting ensures the filter has additional strength for fewer change outs and greater value.
The Pentek C1 replacement water filter cartridge performs optimal in residential applications, and as polishing filters when used in process or closed-loop streams.
Pentek C1 Replacement Specifications:
- Part Number: C1
- Replaces Part Number: WHCF-WHWC
- UPC Number: 051678002438
- Dimensions: 9-3/4" x2-1/2" (2-5/8" with end-caps)
- Filter Media: PAC Impregnated Cellulose
- Filter Life: 2,500 gallons 3 months
- Micron Rating: 5
- Flow rate: 5 gpm
- Temp Range: 40 - 125 ° F
- NSF Tested and Certified for Standard: 42
- End Caps: Vinyl Plastisol
- Netting: Polyethylene
- Core: Polypropylene
- Reinforcement Backing: Cellulose Polyester
- Economically priced
- High dirt-holding capacity
- Recommended for chlorinated water supplies
- Warning: For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Not recommended with well water.
- Note: Some harmless bacteria will attack cellulose media cartridges. If your cartridge seems to disintegrate, or has a musty or moldy odor, switch to a synthetic media cartridge or consult the manufacturer.
The Pentek C1 Replacement is NSF Tested and Certified to Reduce:
- Chlorine taste and odor
The Pentek C1 Replacement is Compatible With the Following Filters:
- HF-150, HF-160, HF-360
- US-550, US-560
- SY-2000, SY-5167, SY-51971
- GXWH04F, GXWH08C
The Pentek C1 Replacement Fits Standard Size #10 Slim Line Filter Housings From Ametek, Cuno, Harmsco, Kleen, and Other Models That Share Dimensions.
If you don't see your model number check with the manufacturer to verify compatibility.
View the Full C1 Product Specification.
The Pentek C1 Replacement For Whirlpool WHCF-WHWC is the correct replacement for the following part numbers:
The Pentek C1 Replacement For Whirlpool WHCF-WHWC is correct replacement for the following model numbers:
Please provide your e-mail address below to receive a notification when this product becomes available:X
Thanks! We'll send you a notification when this product is available!