1" MERV 13 Furnace & AC Air Filter by Filters Fast® - 6-Pack
BioStrike CFF Ceiling Fan Air FilterThe Whirlpool 4317943 is a genuine OEM part that produces crescent-shaped cubes, fits within a variety of refrigerators and replaces the Amana D7824706Q, Maytag 1005508, ECKMF-90 and ECKMF-94.
The Whirlpool 4317943 includes the following components:
- Two new plugs and cords
- One round 4 pin connection - 7.25" (L)
- One flat rectangle 4 pin connection - 10.50" (L)
- Two cord retainers
- Instructions
- Does NOT include an icemaker valve, bucket or shut-off arm
Whirlpool 4317943 Installation Tips:
- Your ice maker must be installed for up to 24 hours before it will begin to produce ice.
- The Whirlpool ice maker kit no longer includes a shut off arm, since top-bottom fridges (freezer on top) require a different shut off arm than side-by-side refrigerators. If you are buying a new icemaker or replacing an old one and cannot reuse your existing shut off arm, you'll need to buy one of the following icemaker shut off arms:
- Top-bottom fridges require the Whirlpool Ice Maker Shut Off Arm 627792
- Side-by-Side fridges require the Whirlpool Ice Maker Shut Off Arm 627913 (Whirlpool 2304354)
The Whirlpool 4317943 fits select refrigerator models from the following manufacturers:
- Whirlpool
- Roper
- Kitchenaid
- Amana
- Kenmore
Compatible Models:
The Whirlpool 4317943 is correct replacement for the following model numbers:
Customer Reviews:
Received ice maker in 3 working days. It was really easy to install and took probably no more than 15 minutes. After power was plugged in again, it took about 2-3 hours before it start making ice. After 24 hours my ice tray is now half full. It was also easy to transfer the shut off arm from the old one to the new one. I estimate by doing it myself I saved about $150.00 You only need 1 ratchet, 1 socket and an extension for the socket. You cannot see the first bolt on the left side as it is immediately behind the housing, that was the hardest part to get the socket over the bolt.
Collected by FiltersFast.comIce maker arrived within two days from being shipped. Fantastic! Read all the instruction very carefuly as I went. Old Ice maker came out as described in instructions. Installed new ice maker according to instructions and everything went as they should have, FANTASTIC !! No rocket science needed here. I just proved anyone can do this cause everything usually goes wrong for me somewhere along the way of doing as the instructions say. Being dislexic DOES NOT help me any either. Many thanks to filtersfast.com for saving me a ton of money too. Local parts house wanted $127.99 for the very SAME ice maker. Did not take me long to make a decision on that. Thanks
Collected by FiltersFast.comIce maker kit arrived in 5 days. I was replacing one in a KitchenAid refrigerator that was about 13 years old. None of the wiring harness were compatible so I had to remove the wiring harnrss from my old unitand install it on the new unit. Also, the bracket for the third scew on the bottom of the icemaker did not line up with the hole in the frig so I had to swap it out with the one on the old unit. And had intall the wire arm as mentioned in the specs. It look a while to get everything figured out but once I finally got it installed, it works perfectly. Saved a ton of money compared to hiring a repairman
Collected by FiltersFast.comOrdered my replacement icemaker from Filters Fast and their very helpful sales tech. It was easy to install and came with wire harnesses for various model applications. Remember to save shut off arm from your old ice maker as new one does not provide one. It is easy to pop out with slight pressure carefully apllied with needle nose pliers. Also remove power from unit during install.
Collected by FiltersFast.comFast delivery. Installed in 15 minutes. Used shut off arm from existing ice maker. Best price on this site. Others charged twice as much.Highly recommend!
Collected by FiltersFast.comJust received my replacement icemaker. Including the time it took to open the box, it tool only 11 minutes to remove the old icemaker and install the new icemaker. Local parts suppliers wanted $105.00-$120.00 for the part alone. If I had it installed by a tech, it would have been an additional $65.00 to $90.00. Total cost to me was ~$75.00 and 11 minutes of my time. Great price and delivery turnaround.
Collected by FiltersFast.comI am so happy I found FiltersFast.com. I always buy my refrigerator filters there, but this time I needed an ice maker and being able to purchase it from them saved me half of what I would have spent for the exact same part at the retailer where I bought the refrigerator. I usually purchase online, but I wanted to be sure I was making the right choice, so I called and the man was so helpful and reasuring. I recieved promt e-mails updating me of the status of my order. I ordered on Wednesday and was making ice Saturday! They are the best online merchant I have ever used.
Collected by FiltersFast.comPerfect replacement, works great and saved $250.00 by doing it myself!
Collected by FiltersFast.comRecieved the ice maker in days. It was damaged during shipping but with a phone call they had another on the way. Simple installation and started making ice within hours!! Very pleased so far and would recommend this site to anyone. Also had most affordable price on the net. Thanks again!!
Collected by FiltersFast.comWe ordered the ice maker kit from this website, and recieved it in three days. Very easy to install, done in less that 20 minutes. It was half the price of the same replacement kit from sears. Well worth the money!
Collected by FiltersFast.comVery quick shipping, super easy to install made ice cubes immediatly!! saved us $200
Collected by FiltersFast.comProduct Availability
Please provide your e-mail address below to receive a notification when this product becomes available:
XThanks! We'll send you a notification when this product is available!
