Free Shipping on orders over $99 | FREE 365-DAY RETURNS
Filters Fast Logo Header
Free Shipping Item Banner
guarantee

KX Matrikx Plekx P10 Filter - 10" Carbon Filter 20-Pack

Plekx P10

$239.80
Only $11.99 per Filter
Retail: $17.99 /ea
You Save: 33%
As low as
$239.80
Retail: $17.99
You Save: 33%

This Plekx P10 Water Filter is a 10 inch spiral wound activated carbon filter cartridge used for the reduction of the bad taste and odor of chlorine as well as dirt, sediment, rust, and other impurities down to the 5 micron level. It is compatible for use in all water filter systems and water filter housings which use a standard size filter cartridge (10"L X 2.50"W). The Plekx P10 is a unique and economical composite filter, being able to filter both sediment and chlorine.

This Plekx 10 filter is made of activated carbon particles infused into a uniform film and supported using polypropylene non woven webs. This carbon water filter features high chlorine tatse and odor reduction along with a large dirt holding capacity. The Plekx P10 can be used for a wide range of residential, commercial, food service, pre and post reverse osmosis, and light industrial applications.

Plekx P10 Water Filter Specifications:

  • Made in U.S.A.
  • Pressure: 2.0 PSI @ 1GPM
  • Temperature Range: 40 - 125 F
  • Filter Media: Activated carbon
  • Filter Life: About 2,500 gallons
  • Max. Operating Pressure: 250 PSI
  • Flow Rate: Approx. 1 gallon per minute
  • Dimensions: 9 3/4" length x 2 1/2" width
  • Micron Rating: 5 micron nominal; 10 micron absolute
  • Flow Rate: 1 GPM @ 2.0 PSI (may vary depending on specific water filter system)
  • Removes/Reduces: Chlorine taste and odor, sediment, dirt, rust, organic contaminants, certain chemicals, and more

Plekx 10 filters flow in a radial (outside-to-inside) direction, which allows for increased dirt holding capacity and a lower pressure drop. Unlike granular activated carbon (GAC) filters, this Plekx P10 filter cartridge will not channel or bypass because of the uniformity of its extruded carbon medium. The filter life of the Plekx 10 filter is extended by depth filtration through multiple layers of polypropylene spunbonded filtration medium.

The Plekx P10 filter is also known by part number P10-250-109-096.


Related Categories:



Product Availability

Please provide your e-mail address below to receive a notification when this product becomes available:

X
X

Thanks! We'll send you a notification when this product is available!