Viskon-Aire 300' XHD Paint Arrestor Roll - 1 Bag

Customers Who Bought This Item Also Bought

The Viskon-Aire 300' XHD Paint Arrestor Roll is the correct component that fits into the following:

• Paint Booth cross draft and down draft spray exhaust systems

The Viskon-Aire 300' XHD Paint Arrestor Roll, made by Viskon-Aire, provides extreme overspray holding capacity and high efficiency across a wide range of paint materials. Designed with a layer of spun fiberglass (yellow on air entry side) and a thin glass fiberglass backing (white on air exiting side), this paint arrestor is most effective when used with thinner spray products like lacquers and waterborne paint.

Viskon-Aire 300 Feet XHD Paint Arrestor Roll Specifications:

• Arrestor Roll
• 98% Efficiency
• 22 Gram fiberglass
• Fewer change-outs
• Tight weave construction
• One 300 foot roll per bag 
• Progressive density design
• High paint holding capacity
• EPA 40 CFR Part 63 Compliant
• Lower annual operating costs

Product Dimensions:
025-321: 20.5" (width) x 300 FT (length) x 2.5" (depth)
025-322: 22.5" (width) x 300 FT (length) x 2.5" (depth)
025-324: 24" (width) x 300 FT (length) x 2.5" (depth)
025-325: 25" (width) x 300 FT (length) x 2.5" (depth)
025-330: 30" (width) x 300 FT (length) x 2.5" (depth)
025-336: 36" (width) x 300 FT (length) x 2.5" (depth)
025-341: 40.5" (width) x 300 FT (length) x 2.5" (depth)
025-346: 46" (width) x 300 FT (length) x 2.5" (depth)
025-348: 48" (width) x 300 FT (length) x 2.5" (depth)
025-360: 60" (width) x 300 FT (length) x 2.5" (depth)

The Viskon-Aire 300' XHD Paint Arrestor Roll has a progressive density design that ensures proper depth loading. It allows the air entry layer to capture larger overspray particles, while the fine exiting air layer captures smaller overspray particles.