The Pentek CW-F replacement whole house water filter takes extra fine sand, dirt, silt, rust, and scale particles out of your water to improve the flow of water and performance of appliances. String wounds filters are not very common in the marketplace but they do offer excellent tolerance to a wide range of temperatures and minimal pressure drops near the end of their service life. The Pentek CW-F (10 micron) is an economical alternative to the American Plumber W5W (5 micron) water filter and is effective as a prefilter in well water applications.

Pentek CW-F Specifications:

• Part Number: CW-F
• Micron Rating: 10
• Reduces sand, rust, sediment, silt, dirt, and scale particles
• Dimensions: 2-3/8"x9-7/8"
• Filter Media: Polypropylene
• Capacity: 12,000 gallons
• Flow rate: 10 GPM @ < 1 psi
• Temp Range: 40 - 165°F
• For more information, click here.

Please note that the Pentek CW-F is a 10 micron filter and the W5W is actually a 5 micron filter, but the two filters are interchangeable.

California Residents: Prop 65 Warning

The FiltersFast FF10SW-10, 10 Micron String Wound Water Filter 10x2.5 is the correct replacement water filter for the Pentek CW-F. This whole house water filter is no slouch, as it is able to effectively reduce extra fine sand, dirt, silt, rust and scale particles from your tap water to improve the flow of water and performance of appliances. String wound filters are not very common in the marketplace, but they do offer excellent tolerance to a wide range of temperatures and minimal pressure drops near the end of their service life. The FF10SW-10 is an economical alternative and is effective as a pre-filter in well water applications.

Specifications:

• Brand: FiltersFast
• Part Number: FF10SW-10
• Replaces Part Numbers: CW-F
• Pack Size: 1
• Filter Life: 12,000 gallons
• Filter Media: String wound polypropylene
• Dimensions: 9 7/8" x 2 3/8"
• Micron Rating: 10
• Flow Rate: 10 gpm
• Operating Temperature: 40 - 165° F

Compatible Parts:

The FiltersFast FF10SW-10, 10 Micron String Wound Water Filter 10x2.5 is the correct replacement for the following part numbers: