Product Availability

Please provide your e-mail address below to receive a notification when this product becomes available:

Thanks! We'll send you a notification when this product is available!

Liquatec SDF-45-2010 Compatible 10" Filter-10 Micr

SDF-45-2010

You choose how often you want your filter, and we take care of the rest.

Are you a purchasing agent? Purchasing for a business?

Contact [email protected] to gain access to case quantity discounts, account management and terms!

Product Information

Customers Who Bought This Item Also Bought

Reusable Mesh Particulate Respirator Mask Meets N95 N99 Standard $36.95
FiltersFast 1" MERV 13 Air Filters - 6-Pack $59.95
FiltersFast 1" MERV 8 Air Filters - 6-Pack $43.95

This Liquatec SDF-45-2010 20" Sediment Filter has been replaced with the compatible Hydronix SDC-45-2010 and is a 10 Micron sediment water filter cartridge made of 100% pure polypropylene fibers that will reduce the amount of sediment, sand, dirt, rust, silt, and other impurities in your water. These Liquatec compatible Sediment Depth Filter (SDF) Series water filter cartridges feature a coreless design and are an inexpensive solution to pre-filtration for whole house water filters as well as various commercial applications.

Typical home and small business applications for the Liquatec compatible SDF-45-2010 polypropylene filter (also known as a PP filter) include potable water, beverages, wineries, ice machines, post-filtration for GAC filters, and more. Industrial uses of this Liquatec sediment filter include pre-filtration for manufacturing, pre-filtration for fine and low viscosity chemicals, water recycling, film processing, electroplating, etching, image developing processes, plus more.

These Liquatec compatible sediment water filter replacement cartridges are made of 100% high purity polypropylene fibers which are adhesive free, binder free, and surfactant free, and they are of a graded density for higher dirt holding capacity. The Liquatec compatible Sediment Depth Filter Series of (4 1/2" diameter) water filter cartridges are designed for high chemical resistance and feature multi-stage sediment depth filtration. These Liquatec compatible sediment filters utilize technology which creates four separate layers of micron filtration, while the outside-in flow traps the larger sediment particulates which results in a lower pressure drop when compared with standard 2 1/2" diameter water sediment filters. All of the Liquatec compatible SDF Series filters provide a much higher particulate filtering capacity in comparison to standard spun polypropylene and string wound water filter replacement cartridges.

This Liquatec compatible sediment filter is a compatible replacement water filter cartridge that fits industrial and whole house water filter housings which use 20" x 4 1/2" replacement filters.

Liquatec SDF-45-2010 Compatible Sediment Filter Cartridge Specifications:

10 Micron Rating
Temp. Range: 40 - 145 F
Max. Pressure Drop: 46.4 PSI at 68 F
Dimensions: 20"L x 4 1/2"W
Max. Flow Rate: 20 Gallons Per Minutes (GPM)
Media: 100% High Purity Polypropylene Fibers
Reduces: Sediment, Sand, Dirt, Rust, Silt, Etc.

Filter life depends on specific water quality and usage. This Liquatec compatible water filter should be changed when a decrease in pressure is noticed. The replaceable pressure drop recommended by the manufacturer is 21.75 PSI.

The Liquatec SDF-45-2010 compatible is FDA Approved for use in food service applications. It was also tested and certified by NSF International under NSF / ANSI Standard 42 for material requirements only.