Pentek RO-3000 Reverse Osmosis System
The Pentek RO-3000 Reverse Osmosis System is a 3-stage RO system that filters particles as small as 1/1000 of a micron. The first stage is a 5 micron carbon filter (Culligan D-15). This filter screens out sand, sediment, dirt, odor and chlorine taste. For optimum performance, it is recommended to replace this stage 1 filter every 3 months.
The second stage of the filtration process in the Pentek RO-3000 is a carbon drinking filter (Culligan D-20 or D-20A). This filter reduces odor and chlorine taste found in your water. It is recommended to replace this stage 2 carbon drinking filter every 4 months. The D-20 replacement filter is also known as D-20A. Due to a design change, Culligan changed the model number to D-20A.Contaminant reduction with this filter remains the same.
The third stage of this Pentek 3-Stage RO Water Filtration System is the ROM-230T RO Membrane. This process reduces dissolved substances that may be in your water supply like lead and copper. Pentek recommends that you replace this stage 3 reverse osmosis membrane every 2 years.
Pentek RO-3000 System specifications:
- 3 stage reverse osmosis system
- Certified by NSF/ANSI to Standard 58
- Pentek RO-3000 pressure range: 40-100 psi
- Pentek RO-3000 water supply pH limits: 4-11
- Pentek RO-3000 tank capacity: 1.9 to 3.2 gallons
- Pentek RO-3000 dimensions: 13.75"w x 4.75"d x 12.75"h
- Pentek RO-3000 temperature range: 40-100 degrees Fahrenheit
Depending on the water pressure of the Pentek RO System, tank weight is 40 pounds and tank capacity is 1.9 to 3.2 gallons. The Pentek RO-3000 is tested and certified by NSF/ANSI to Standard 58. This RO system offers a variety of contaminant reduction capabilities and is installed under the sink. Depending on your operating conditions, this system can produce up to 7.6 gallons of clean, safe water per day.
For high quality water, the Pentek RO-3000 Reverse Osmosis system reduces the following elements and contaminants: cysts, copper, fluoride, lead, selenium, unpleasant taste, odor, dissolved salts, minerals and sediment. Iron, sulfide and manganese are less than 0.01 ppm.
The Pentek RO-3000 RO System is NSF Certified to reduce the presence of the carcinogenic hexavalent chromium (known as chromium-6) found in drinking water.
Pentek RO-3000 Reverse Osmosis System Product Reviews :Write a review
- Not reviewed yet